Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4×4

The Hot Racing Slash 4×4 Aluminum Center One-Way Differential drives the front and rear wheels under forward acceleration, but allows the front to ‘freewheel’ under braking, decelerating, and reversing. A center one-way allows the vehicle to be ‘whipped’ around during braking. The center one-way allows front differential action, unlike a front one-way. This item is compatible with the Traxxas Slash 4X4, Stampede 4X4, Rally VXL, and Telluride 4X4 vehicles equipped with the center gear differential.

NOTE:This item requires a spur gear that’s for a center gear differential. If the vehicle uses a slipper, then the spur gear will not work and a spur gear designed for a center gear differential will need to be purchased.
Features:

• Ideal for racing on tight tracks where maximum off-power steering is needed
• Allows the vehicle to be ‘whipped’ around during braking for tight corners
• Maintains front differential action
• 6x10mm one-way bearing

Includes:

• (1) center on-way differential
• (1) steel shaft
• (3) M3x5mm button head cap screws

NOTE:Requires a spur gear designed specifically for a center gear differential.

This product was added to our catalog on May 15, 2018

• Traxxas Slash 4×4
• Traxxas Stampede 4×4
• Traxxas Telluride 4×4

stephan labelle Verified Owner Thursday, May 20 2021 (about 4 years ago) Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4×4 Iv’e been running this diff for 7 or 8 months and it still works. Iv’e run this diff with 2s, 3s, and an 8th scale system for a while and it always operated perfectly. What does it do for you? My truck doesn’t flip when I nail the brakes any more and all the 2wd brake tricks I use to increase traction in the corners works. It’s extremely tough and works very well, I highly recommend it.
I just want to mention it fits exactly the same as the stock diff. If it doesn’t the spur gear is bolted to the wrong side of the mounts. If it doesn’t fit unbolt the spur gear and bolt it to the other side of the gear mount. Now it will fit the same as stock. 5 customers found this review helpful. Alexander Parra Sunday, Dec 1 2024 (10 months ago) Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4×4 Yes the products worked well helped a lot with drifting but after a while of use the inside of the center diff hollowed out I don’t if it was cause I was using it on 4s or just a bad product overall if you buy this product don’t use it on 4s Jonathan Hogue Verified Owner Wednesday, Aug 24 2022 (about 3 years ago) Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4×4 Garbage product that DOES NOT fit the Slash 4×4 as intended. Have multiple upgrades installed on the Slash 4×4, including the following:
-LCG Chassis
-HR font/rear bulkheads
-HR motor mount and much more, however, are the most important to note.
THE ISSUE IS, that the HR motor mount that’s marketed to be a direct fit replacement/upgrade, doesn’t allow for securing the rear bulkhead and assembly. The bearing housed inside the motor mount for the LCG chassis is positioned so that the bulkhead and attached suspension can’t be slid into place, whereas the stock direct drive center differential easily allows for securing the rear of the truck to the main chassis. Don’t waste your time with this optional upgrade! 0 of 3 customers found this review helpful. View all reviews