This is the DE Racing 1/10 Offroad Setup System Kit. This kit is compatible with a variety of vehicles. Click the compatibility tab for a list of models this can be used with. The DE Racing setup system is an all in one kit. The wheels feature a smooth flat vertical surface for interface with your existing measurement tools, and are set to the ride height for your specific model. Though some of these “basic” features are unique unto themselves, the final feature is what creates the benchmark in chassis setup; DE Racing calls this “roll to set”.
Designed as the foundation of this system, “roll to set” describes the proper use of the setup wheels and is what truly makes this system different. Drop the car from about six inches onto a smooth flat surface, roll the car a few inches forward, and check the results. This process uses the geometry of the car against the grip of the rubber tire to lock the wheels into a proper position for checking camber and toe. It sounds simple, but without this process measuring wheel alignment can only be close at best on a car in perfect condition. Add more wear and it only gets worse.
DE Racing’s setup system is the only product on the market that allows you to achieve the same setup time after time, regardless of how much wear the car has. The result is tuning consistency and accuracy that could never be achieved before. The DE Racing system is going to redefine precision R/C car chassis setup, at a price point that makes “luxury” a thing of the past.
Features:
- Convenient all in one kit with reduced price
- Smooth flat face to accurately set camber and toe
- Wheel diameters match those of tires for setting ride height
- Unique “roll to set” feature
- Small size and rugged build for convenient pit bag transport
- Made in the U.S.A.
This product was added to our catalog on November 15, 2017
- HB Racing D413
- Kyosho Lazer ZX-5
- Kyosho Lazer ZX-6
- Kyosho Lazer ZX-6.6
- Kyosho Ultima RB5
- Kyosho Ultima RB6
- Losi 22 1.0
- Losi 22 2.0
- Losi 22 3.0
- Losi 22 3.0 SPEC-Racer
- Losi 22 4.0
- Losi 22 4.0 SPEC-Racer
- Losi 22-4 1.0
- Losi 22-4 2.0
- Team Associated RC10 B4.2
- Team Associated RC10 B44.3
- Team Associated RC10 B5 Original
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
- Team Associated RC10 B64D
- Team Associated RC10 B74 Original
- Team Associated RC10 B74.1
- Team Associated RC10 B74.1D
- Team Associated RC10 T4.2
- Team Associated RC10B6 Original
- Team Associated RC10B6.1
- Team Associated RC10B6.1D
- Team Associated RC10B6.2
- Team Associated RC10B6.2D
- Team Associated RC10B6.4D
- Team Associated RC10B6D
Eric Powell Verified Owner Thursday, Sep 22 2022 (about 3 years ago) DE Racing 1/10 Offroad Setup System These work great, its amazing how far off your measurements can be using wheels with tires on them. These are the best option short of a setup stand that cost nearly 10x as much.
I’m not sure what a previous poster was talking about when they said these dont match 1/10 buggy tires for measuring ride-height, these are an exact match for Proline Blockade 2.2″ buggy wheels. 2 customers found this review helpful. Ken Seratte Verified Owner Wednesday, May 26 2021 (about 4 years ago) DE Racing 1/10 Offroad Setup System I set up a new build “eyeing” it, then with these. These made it much easier to get it even on both sides, and I think is particularly useful if you’re trying to keep toe in/out, camber, etc. to very small amounts. 1 customer found this review helpful. Igor Verified Owner Friday, Mar 26 2021 (about 4 years ago) DE Racing 1/10 Offroad Setup System These are great for camber and toe setup, and setting steering endpoints. Not quite a setup stand, but better than using bare new wheels or your track wheels. Not ideal for adjusting ride height… at least not with 1:10 buggies (but maybe OK with trucks?), but I don’t think that’s much of a negative, so I give them 5 stars. 1 customer found this review helpful. Ryan Rose Verified Owner Sunday, May 18 2025 (4 months ago) DE Racing 1/10 Offroad Setup System High quality build and materials. 3 stars because the diameter of the axle hole on the adapters was too small (~4.8mm) and I had to drill them out to fit the ~5.0mm shafts on my Mugen MSB1. I measured a set of Schumacher wheels as a sanity check, and those had a ~4.92mm hole. View all reviews
Reviews
There are no reviews yet.