RPM’s three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. It is made with a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available.
The Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. Supplied are longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well.
RPM light canister sets (RPM80982 & RPM80983) fully integrate with the Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out the Roof-Mounted Light Bar Set too (RPM80922, RPM80923 or RPM80925) for 6 more light canisters of night-blasting fun!
This product was added to our catalog on March 24, 2010
- Traxxas Slash 4×4
Anonymous Sunday, Feb 13 2011 (about 14 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) Excellent product by RPM! While the stock bumper feels a bit more stable due to the additional support of being attached to the front diff, there does not seem to be any loss of durability. This thing has taken hits that I believe SHOULD have broken the bumper and it comes out with just a scratch. I’ve had my truck come crashing down on this bumper from 8 feet of air onto concrete and this bumper took it like nothing. Great product! To be fair, I can’t really say it’s any more or less durable than the stock bumper as I’ve taken some serious hits with it as well and not broken anything. I bought this bumper to allow for the RPM canister lights and LED kit, which unfortunately were a disappointment for a basher.
I’d give it 5 stars, but the included screws are too long! The center of the three screws interfered with my sealed differential and cut a deep groove around the whole thing, spreading strings of plastic around the housing and getting in the gears and stripping out the differential housing. 4 customers found this review helpful. Anonymous Saturday, Jan 8 2011 (about 14 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) Just another great product from RPM. It did amazing soaking up the hits while not transfering the force to the diff housing. 2 customers found this review helpful. Brian Rodenburg Sunday, Mar 25 2012 (about 13 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) This product is not good stick with stock. It does not use the center brace like the stock one which will cause the scres holding it on from the bottom to pull out and strip the screw holes in your diff housing and your front bulkhead. The supplied screw is to long and if you run it it will ruin the diff gear housing inside. It is just poorly designed. It is amazingly strong, but if that means ruining everything attached to it. I would go with the stocker. I now have a hybdrid using the stock bumper with center support and the extra thick rpm skid plate. This gives me the best of both worlds. I LOVE RPM PRODUCTS JUST NOT THIS ONE!!!!!!!!!!!!!!!!!! 2 of 3 customers found this review helpful. 2008bankcrashistaxthefttofundbillionaires Verified Owner Wednesday, Aug 20 2025 (6 weeks ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) i’m sure a 5 star product, 3 stars since it didn’t list what year it works for, it did not fit on my older slash from over 5 years old. watch out for kraton bumpers too, not all rpm bumpers work on the newest kratons although they are listed that way. But then again that may be a fault of distributors and not RPM. So this product i’d give 5 stars, just not the vehicle year compatibility. R.J. Monday, Dec 3 2018 (about 6 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) WHY DIDN’T I READ THE REVIEWS FIRST!?!
Then I’d have known to not use RPM’s DANGEROUSLY LONG SCREWS that poked up into my diff, causing it to bind. Perhaps due to my lack of conviction, or maybe just lack of hand strength, I failed to drive the screws all the way THROUGH the [factory] bulkhead plastic, instead merely temporarily deforming it. Swapping back to the original screws (and bumper) fixed the problem.
Perhaps this bumper and its prodigious screws were only meant to play nicely with the RPM bulkhead kit. Fine. That wouldn’t bother me, but the bumper installation instructions MAKE NO MENTION OF IT! For shame, RPM.
So is this bumper any good? Beats me. I can’t use it yet. Henry Simas Verified Owner Saturday, Mar 7 2015 (about 10 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) I purchased this bumper ( still waiting to arrive) because I run them on my TWD slash and found these to be the strongest bumpers on the market. my TWD slash hit a brick building doing about 60 mph and the only parts on the front end that survived was the rpm bumper and RPM A-arms. rpm parts are not only the most durable aftermarket parts you can purchase but they have a life time warranty. Randy Kennedy Verified Owner Thursday, Oct 20 2011 (about 13 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) The bumper is durable. BUT, BE SURE TO CHECK CLEARANCE ON THE MOUNTING SCREWS AND THE FRONT DIFF! Mine rubbed and had I not noticed, the diff housing would have been damaged. I ended-up using the OEM screws to mount the bumper to the chassis. Another possible option would be to grind the new screws down by an 1/16 or 1/8″.
RK Anonymous Verified Owner Tuesday, Mar 1 2011 (about 14 years ago) RPM Front Bumper & Skid Plate for Traxxas Slash 4×4 (Black) Order this as well as the RPM rear bumper & mud flaps when I ordered my Slash Ultimate. Never ran my Slash with the Traxxas OEM pieces but I have no complaints about the RPM parts. Install was easy and gives a nice look. I’d recommend it! View all reviews
Reviews
There are no reviews yet.